Snooper 6 SERIES Manual Del Usuario página 76

4. The unit is automatically shut down during operation
Please check the power control setting in the Setting menu.
5. Can't hear anything from speaker or earphone
Please check the volume level.
Please check the Mute status.
For earphone, please check if the jack is inserted properly.
6. Screen is dark.
Adjust the LCD brightness from the Setting menu.
7. Broadcast cannot be scanned./ Broadcast is stopped.
Pull out the antenna and move to a good place for reception or adjust the antenna position.
8. Can't read the SD card
Please remember that this device supports Micro-SD type or Micro-SDHC class 6 type card with max. 8GB.
Please check if the file system is of FAT16 or FAT32.
Please check if the surface of the card is stained with dirt.
10. Can't write on the SD card
Please check if SD card is properly inserted.
Please check if the surface of the card is dirty.
11. Touch function does not work well.
Please touch the screen accurately because it cannot be recognized if you touch the screen with fingernails only or with less
pressure.
Please perform Touch Calibration.
12. Can't charge the battery
Please check if the AC adapter/cigarette lighter adapter is connected correctly.
Please check if the contact area is dirty.
If you operate the unit during USB charging, the charging may not be completed. So please turn off the unit to charge or charge
the unit by using AC/cigaratte lighter adapter.
13. Can't recognize USB cable from PC
Inserting SD card enables to recognize it as UMS and to be seen as a directory from PC. Please check the SD card insertion.
Please check if the USB cable is normal and make sure it is connected properly.
14. Can't mount the cradle
Please remove the dust from the place you want to mount.
Please wash and dry the suction-cup in running water and try again.
Return to contents
75 • EN