Working with special accessories
NOTE
►
The special accessories, such as a meat
grinder attachment, a noodle attachment and
vegetable grater, can be ordered online at
www .kompernass .com .
ATTENTION! PROPERTY DAMAGE!
►
The drive unit for special accessories o
should only be used for accessories which
are specifically approved for use with this
appliance by the manufacturer .
1) Turn the appliance off using the rotary switch 3
(Position "0") .
2) Push the cover over the drive unit for special
accessories o upwards and remove it from
the appliance .
3) Attach the special accessory to the appliance
in accordance with its operating instructions .
ATTENTION! PROPERTY DAMAGE!
►
Never use special accessories at the same
time as the mixing bowl 6 or blender t!
This will overload the motor!
After you have finished using
your appliance
1) Turn the appliance off using the rotary switch 3
(Position "0") .
2) Disconnect the special accessory from the ap
pliance as stated in its operating instructions .
3) Clean all components as described in the
section "Cleaning and care" .
4) Place the cover for the drive unit for special
accessories o back in position .
■
64
│ GB │ MT
Cleaning and care
DANGER – RISK OF ELECTRIC SHOCK!
►
Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
Never immerse the appliance in water or
any other liquid!
ATTENTION! PROPERTY DAMAGE!
►
Do not use abrasive or aggressive cleaning
materials . These may damage the surfaces .
NOTES
►
We recommend cleaning the appliance
directly after use . This makes food residues
easier to remove .
►
Processing foods that contain strong pig
ments, such as carrots, may lead to staining
of the plastic parts . These stains can be
removed using a little cooking oil .
Cleaning the appliance
■
Wipe the appliance with a damp cloth . For
stubborn soiling use a mild detergent on the
cloth . Wipe off any detergent residue using a
cloth moistened with clean water . Then dry the
appliance carefully .
Cleaning the accessories
■
Clean the mixing bowl 6, the lid 9, the cover
of the filling opening 8, the blender lid r with
measuring cup e, the drive protection cover u,
the blender tool p and the attachments 0 q w
in warm water with a little detergent . Any residues
can be removed with a washingup brush . Rinse
all parts with warm clean water and make sure
that all parts are dry before reusing them .
SKV 1200 A1