Cleaning And Care - Klarstein Mega Jerky Manual Del Usuario

EN
40

CLEANING AND CARE

Note: Before cleaning or servicing the dehydrator, make sure that the mains plug is
disconnected and the mains switch is set to OFF.
• Clean the slots and the inside of the housing before using the dryer for the first time
and after each use.
• Turn the power switch and the timer knob to the OFF position. Unplug the power
cord from the wall outlet.
• Allow the dryer to cool completely before cleaning.
• Remove the racks from the dryer.
• Wipe the drying cabinet with a damp sponge or washcloth (inside and outside). Be
careful, the edges can be sharp! Do not splash water on the heating element. Water
can damage the electrical components and increases the risk of electric shock. Do
not immerse the unit in water.
• Clean the shelves of the dehydrating device with warm, soapy water. Rinse with
clear water and dry immediately.