Valex MTrNiCd Instrucciones Para El Uso E Instrucciones De Seguridad página 11

the electrical tool battery unit before any adjustment, replace
the accessories or store the electrical tools. These preven-
tive safety measures reduce the risk of accidental start of the
electrical tool.
d) Store unused electrical tools out of reach of children and do
not allow them to be used by any unskilled people or who are
not aware of these instructions. Electrical tools are dangerous
if used by unskilled people.
e) Carry out the required maintenance on electrical tools.
Check any possible misalignment or locking of the moving parts,
any breakage of the parts and any other condition that may
affect the operation of electrical tools. If there is any damage,
the electrical tool must be fixed before use. Numerous accidents
are caused by improper maintenance of electrical tools.
f) Keep the cutting elements, where fitted, clean and sharpe-
ned. Cutting elements in good conditions and with sharp edges
are less likely to get blocked and can be controlled more easily.
g) Use the electrical tool, accessories and bits etc. according
to these instructions, considering the work conditions and the
operation to be performed. The use of the electrical tool for
operations other than those for which it is intended may cause
dangerous situations.
h) Support the tool with the insulated handles, when perfor-
ming an operation during which the work device could come
into contact with hidden cables.
If the work devices come into contact with a "live" conductor the
metal parts of the electrical tool could become "live" and cause
an electric shock (electrocution) to the operator.
i) Keep a safe distance from moving parts. Touching moving
parts causes serious injuries.
l) Do not modify the electrical tool. Taking off, replacing or
adding components not included in the instructions is prohibited
and causes the warranty to become null and void.
m) Do not leave the electrical tool running unattended. Turn it
off before leaving it unattended in order to prevent any accidents.
n) The electrical tool must never come into contact with
water or other liquids. Use in these conditions may cause
electrocution.
5) Use and precautions for use of battery-operated tools
a) Recharge only with the battery charger indicated by the
manufacturer. An inappropriate battery charger can cause a fire
hazard when used with other battery units.
b) Use electrical tools only with specifically designated
battery units. The use of any other battery unit can cause a
risk of injury or fire hazard.
c) When the battery unit is not in use, keep away from other
metal objects such as, paper clips, coins, keys, screws or other
small metal objects which could create a connection between
the two terminals. Short-circuiting the battery terminals can
cause burns or fires.
d) If it is in poor condition, the battery liquid may leak. In
such case, avoid any contact. In case of accidental contact,
rinse immediately with water. If case of contact with eyes,
immediately contact a doctor. The liquid leaking out of the
battery can cause irritations or burns.
e) Keep the equipment and the batteries far from heat sources
and fire. Do not expose them to temperatures over 50°C. High
temperatures can cause the batteries to explode.
6) Support
a) have maintenance operations on electrical tools carried out
by qualified technical staff only using original spare parts. This
allows the constant safety of the electrical tool to be maintained.
b) Do not attempt to repair the electrical tool or to access
internal parts. Interventions by unqualified personnel and
unauthorised by the manufacturer could create serious risks
and will cause the warranty to be null and void.
c) Request only original spare parts. The use of non-original
spare parts may compromise the safety of the electrical tool.
SAFETY WARNINGS OF ThE BATTERY-OPERA-
TED DRILL/SCREWDRIVER
a) Wear ear protection when using the drill with the percussion
function. Exposure to noise can cause loss of hearing.
b) Use the hand grip(s) provided with the tool. Loss of control
can cause injuries.
c) Support the tool with the insulated hand grips, when
performing an operation during which the work device could
come into contact with hidden cables. If the work devices
come into contact with a "live" conductor the metal parts of the
electrical tool could become "live" and cause an electric shock
(electrocution) to the operator.
d) Before inserting or removing drill bits, take the battery out
of the tool. Any maintenance must be performed safely in order
to prevent accidents caused by an unexpected start.
e) Working on the ceiling with the tool upwards can be more
dangerous for the operator. Use a protection helmet in case any
material falls down. Wear eye protection goggles.
f) For work on buildings or load-bearing structures, closed
pipes or containers it is important to check, by means of
detectors, that inside there are not any: electric or telephone
cables, pressurised liquids or gases (that may be flammable
and corrosive), piping, etc. Even partially cutting masonry work
can weaken the structure of the whole building, causing it to
collapse. Leaking of liquids or gases may cause explosions,
fire and flooding.
g) If the tool stops during use, switch it off immediately. Do
not force difficult operations for the tool.
h) hold the tool firmly. The strains caused by working lead to
stress which must be contrasted with your force.
i) Fasten the item you are working on with a vice or another
device. An item held by hand can suddenly cause an accident.
l) Wait for the electrical tool to stop completely before putting
it down. The moving parts could cause falling.
m) If the tool stops do not continue to press the start button.
The battery could be irreparably damaged.
SAFETY WARNINGS OF ThE BATTERY AND
BATTERY ChARGER
a) Do not disassemble or tear the battery case. Do not hit it or
drop it. Damaged batteries can cause serious danger.
b) Do not expose the battery to heat or fire. Do not expose it to
direct sunlight. Do not leave it inside vehicles. Do not expose
it to temperatures over 50°C. Risk of explosion.
c) A battery used incorrectly can cause vapours to leak out.
Ventilate the room and consult a doctor if necessary.
d) Keep batteries and electrical equipment out of the reach
of children. It is good practice to keep children away from
electrical equipment.
e) Do not put any metal objects into the battery compartment.
Do not put the battery away with other metal objects (like
the tool box) or with other batteries. Risk of generating a
short circuit.
f) Use the battery charger in closed rooms sheltered from rain
and humidity. Prevent possible electric shocks.
g) Always keep the battery charger clean. Dust and dirt prevent
correct charging.
h) Before use, always check the battery charger, cable and
plug. Do not use it in the event of damage or faults. Never open
the battery charger and only have it repaired by qualified staff
- 11 -