Problems, Causes And Solutions - Valex MTrNiCd Instrucciones Para El Uso E Instrucciones De Seguridad

PROBLEMS, CAUSES AND SOLUTIONS

PROBLEM
The electrical tool fails to
start
The battery does not charge Battery not correctly inserted in the battery
The drill stops while drilling Battery empty
! IMPORTANT! If the electrical tool still fails to operate cor-
rectly after you have carried out the above operations, or in
the event of anomalies other than those described above, take
it to an authorised service centre with proof of purchase and
ask for original spare parts. Always provide the information
shown on the technical data label.
WARRANTY
The product is protected by law against non-compliance with the
declared characteristics provided it is used only in the manner
described in the instructions, it has not been tampered with
in any way, it has been stored properly, has been repaired by
authorized and, where applicable, have been used only original
spare parts.
In the case of industrial or professional use or when using such
a guarantee is valid for 12 months.
To issue a claim under warranty you must present proof of
purchase to your dealer or authorized service center.
CAUSES
Battery empty
Battery not correctly inserted in the tool
housing
Rotation direction switch in central lock
position
The battery has overheated and the internal
auto reset protection has cut in
Electrical tool or battery faulty
charger housing
Battery charger not ready for charging
Battery charger or battery faulty
The battery has overheated and the internal
auto reset protection has cut in
SOLUTIONS
Fully charge the battery
Take out the battery and insert it correctly
Move the switch to one of the two positions R or L
Wait for the battery to cool down
Replace the battery and/or contact an authorised
service centre
Take out the battery and insert it correctly
Plug it into the electric power supply.
Press the start charging button (if fitted)
Replace the battery and/or contact an authorised
service centre
If available insert a new charged battery, or take
out the battery and fully charge it.
Wait for the battery to cool down
AMENDMENTS
The text, figures and data correspond to the standards in place
on the date of printing the instructions contained herein. The
manufacturer reserves the right to update the documentation
if changes are made to the appliance, without being bound by
any obligations.
No part of this publication and the documentation enclosed with
the machine may be reproduced without written permission
from the manufacturer.
©
- 17 -