Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
It should therefore not be disposed of with domestic waste,
but by means of differentiated collection at specific centres
or returned to the vendor in the event of purchasing a new
identical tool. The illegal disposal of such equipment may
result in prosecution to the full extent of the law.
11 Risk of explosion. Keep the equipment and the batteries far
from heat sources and fire. Do not expose them to tempe-
ratures over 50°C.
12 Auto reset thermal switch (if fitted)
13
The batteries included in the equipment can be disposed
of along with it. Do not throw the used batteries on the fire
and do not dispose of them in the environment, but take
them to special disposal centres. Do not dispose of them
with domestic waste.
14 Cadmium Cd content over 0.002% in weight (if fitted).
15 Risk of material ejection. Wear goggles to protect your eyes.
16 Risk of sharp parts. Wear protective gloves.
V
volts
Hz
hertz
~
alternating current
direct current
A
Ampere
W
watts
kg
kilograms
n
no-load speed
O
mm
millimetres
s
second
h
hour
min
R.P .M.
-1
dB
decibel
double electric insulation
°C
Celsius degree
Ni-Cd
Nichel-Cadmio
_______________________________________________
We thank you for having purchased this electrical tool that
will hereafter also be referred to as "battery-operated drill -
screwdriver".
! IMPORTANT! The battery-operated drill - screwdriver is
suitable for drilling metal, wood, plastic and brick and for
tightening - loosening screws. It is prohibited to use dange-
rous materials in environments with risk of fire/explosion.
These instructions contain information deemed necessary for
proper use, knowledge and standard tool maintenance. They
do not include information on drilling and screwing techniques;
the user can find additional information in specific books or
publications or by attending special training courses.
COMPONENTS
Refer to fig. A and the following figures, attached to these
instructions.
1
Start/stop switch and electronic speed modulator (if fitted)
2
Rotation direction and start lock switch (if fitted)
3
Rechargeable battery
4
Battery release buttons
5
Ring nut for tightening torque variation
6
Chuck
7
Insert for screwing bits (if fitted)
8
Battery charger
9
Ring nut for selecting percussion, drilling or screwing
function (if fitted)
10 Side handle (if fitted)
11 Charging in progress light (if fitted)
12 Charging complete light (if fitted)
13 Battery charge start switch (if fitted)
14 Mechanical speed switch (if fitted)
15 Battery charge status indicator (if fitted)
16 Strap for attaching to wrist (if fitted)
17 Clasp for waist strap (if fitted)
18 Light for work area (if fitted)
19 Main handle
20 Minimum/maximum speed regulator (if fitted)
21 Lock button for continual use (if fitted)
22 Air vents
23 Depth rod (if fitted)
24 Battery empty light (if fitted)
25 Battery charger plug and cable
26 Charging socket
27 Pin charging
28 Light switch (if present)
INSTALLATION
! IMPORTANT! The manufacturer is not liable for any direct
and/or indirect damage caused by incorrect connections.
! IMPORTANT! Before carrying out the following operations,
make sure that the plug is disconnected from the mains.
TRANSPORT
Always use the packaging or case (when provided) when
transporting the tool; this will protect it from impact, dust and
humidity which can compromise normal operation.
When transporting the tool remove the battery.
MOVING
Position the rotation direction switch in the middle position in
order to prevent accidental start-up.
- 13 -
Publicidad
Tabla de contenido
