General Safety Rules - Oregon WL275 Manual De Instrucciones

GENERAL SAFETY RULES

Important:
Carefully read through this entire instruction manual before using your new tool . Pay close
attention to all warnings and instructions for proper and safe use . Use your tool properly and only
for what it is intended .
The use of safety symbols in this manual it to attract your attention to possible dangers . The
safety symbols, and the explanations with them, require your full understanding . The safety
warnings do not by themselves eliminate any danger, nor are they substitutes for proper accident
prevention measures .
SYMBOL : This Safety Alert Symbol indicates caution, warning, or danger . Failure to
obey a safety warning can result in serious injury to yourself or others . To reduce the
risk of injury, fire, or electric shock always follow the safety precautions .
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and
instructions .
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury .
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term "Power tool" in all of the warnings
refers to your WL275 Portable Light .
1) SAFETY
a) Keep work area clean and well lit . Cluttered
and dark areas invite accidents .
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust . Power tools
create sparks which may ignite the dust or
fumes .
c) Keep children and bystanders away while
operating a power tool . Distractions can
cause you to lose control .
2) ELECTRICAL SAFETY
a) Avoid body contact with earthed or
grounded surfaces such as pipes, radiators,
ranges and refrigerators . There is an increased
risk of electric shock if your body is earthed or
grounded .
b) Do not expose power tools to rain or wet
conditions . Water entering a power tool will
increase the risk of electric shock .
4
WL275_Operating_Manual EN-ES-FR.indd 4
General Safety Rules
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and
use common sense when operating a power
tool . Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication . A moment of inattention while
operating power tools may result in serious
personal injury .
b) Use safety equipment . Always wear eye
protection . Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries .
c) Remove any adjusting key or wrench before
turning the power tool on . A wrench or a key
left attached to a rotating part of the power
tool may result in personal injury .
d) Do not overreach . Keep proper footing
and balance at all times . This enables better
control of the power tool in unexpected
situations .
e) Dress properly . Do not wear loose clothing
or jewellery . Keep your hair, clothing and
gloves away from moving parts . Loose
clothes, jewellery or long hair can be caught
in moving parts .
f) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used . Use of these devices can reduce dust-
related hazards .
GENERAL SAFETY RULES
Oregon® Portable Light WL275
18/03/16 10:36