Product Safety Instructions - Oregon WL275 Manual De Instrucciones

PRODUCT SAFETY INSTRUCTION
1 . Always charge
recommended by the manufacturer . Chargers
designed for a specific type of battery may
pose a fire hazard when used together with
other battery types .
2 . You must only insert the correct batteries
in the Portable Light . Using other batteries
may cause injuries and pose a fire hazard .
3 . When not in use, keep batteries away from
paper clips, coins, keys, nails, screws or
other small metal objects that could bridge
the contacts . Short circuits between battery
contacts can cause burns or fires .
4 . Fluid may escape if batteries are used
inappropriately . Avoid all contact with this
fluid . In the event of accidental skin contact,
rinse the affected area thoroughly . If the fluid
enters your eyes, seek immediate medical
assistance . Escaping battery fluid can cause
skin irritation or burns .
5 . Do not operate the Portable Light in
potentially
containing flammable dust, fluids or gases
. The Portable Light can generate sparks
which may ignite dust or vapours .
6 . Avoid accidental operation . Make sure
that the Portable Light is switched off
before connecting the battery and before
picking up or carrying the Portable Light .
Accidentally pressing the switch on the
device or connecting the device to the power
supply when already switched on can lead
to accidents .
7 . Always switch off the Portable Light when
not in use .
8 . Never use electrical devices with a defective
switch . Electrical devices that can no longer
be switched on or off are dangerous and
must be repaired immediately .
9 . Remove the battery before adjusting,
cleaning and storing the device or changing
accessories . These precautionary measures
prevent accidental operation of the Portable
Light .
10 . When not in use, keep the Portable Light
out of the reach of children . Do not allow
personnel to use the device unless they
are already familiar with it or have read
6
WL275_Operating_Manual EN-ES-FR.indd 6

Product Safety Instructions

batteries in chargers
explosive environments
PRODUCT SAFETY INSTRUCTIONS
these instructions . Electrical devices are
dangerous when used by inexperienced
personnel .
11 . Maintain the device carefully . Check that all
moving parts are functioning correctly and
do not seize, make sure that no parts are
broken or damaged to an extent where they
affect the function of the Portable Light .
Have damaged parts repaired before using
the device . Many accidents are caused by
poorly maintained electrical tools .
12 . Do not operate the Portable Light without a
lens, or with a lens that is damaged .
13 . Use the Portable Light, accessories, etc . as
described in these instructions . Take into
consideration the working conditions and
tasks required . Using electrical devices for
applications other than those intended can
lead to dangerous situations .
14 . Keep your Portable Light away from heat
sources and fires . Do not store your Portable
Light in moist or wet ambient conditions . Do
not store in locations where temperatures
may reach or exceed 40˚C . Examples include
alcoves, motor vehicles or metal structures
during the summer .
15 . Do not expose the Portable Light to rain,
excessively damp conditions, or complete
submersion .
16 . Do not leave the Portable Light on while
unattended .
17 . The Adapter (AC Power) is designed for
indoor use .
18 . Never use an incomplete Portable Light, or
one on which an unauthorised modification
has been made . Do not switch on the
Portable Light if tool parts or guard devices
are missing or defective . Do not switch on
the Portable Light if the Adapter cord is
damaged .
19 . Always ensure the Portable Light is steady
and properly secure before use .
Oregon® Portable Light WL275
18/03/16 10:36