Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PROTEGO / SL
| Multifunctional wheelchair
•
Loosen the hand wheel. Pull the leg supports until they are in the
desired position (Fig. 9).
•
Retighten the hand wheel.
•
The leg supports can thus be adjusted to any desired position.
•
The calf pad can also be moved lengthwise and crosswise along the
leg supports.
•
Loosen the fixing screws (WAF 4) and place the calf pad in the
9
desired position (Fig. 10).
•
Firmly retighten the fixing screws.
10
4.4. Side panels and armrest
•
TThe height of the side panels, including the padded armrest, can
be adjusted.
•
Loosen the hand wheel to do this (Fig. 11) and fully remove the
side panel from the guide rail.
•
Now you can remove the screw and reinsert it in the desired hole.
•
Then you can reinsert the side panel and fix it in place.
11
•
Please ensure the clothing guard is adjusted after adapting the
height of the side panel. Accordingly grasp the centre of the cover
and slide it in the desired direction along the guide (Fig. 12).
•
The padded armrest can also be adjusted horizontally.
12
•
Press the metal button on the side of the armrest (Fig.13).
•
Keep pressing the button and slide the armrest into the desired
position. Release the button and the armrest will engage at the
desired position.
58
Before moving off, check for firm attachment of
the legrests!
Do not use the side parts to lift the wheelchair!
Multifunctional wheelchair |
4.5. Seat
Seat width
•
The width of the seat can be extended for all models by 2.5 cm
each in order to meet the needs of the user.
•
The same adjustments must be made on the right and left side.
•
First, remove the wheels, side parts and the hand screw for the side
panel.
•
Loosen the four screws on the side panel bracket and move the
distance piece from the inside (left arrow in Fig. 14) to the outside
(right arrow in Fig. 14).
•
Re-tighten the screws.
•
Afterwards, you will need to adjust the distance between the
wheels.
•
Loosen the fastening nut and move the distance piece from the
inside (left arrow in Fig. 15) to the outside (right arrow in Fig. 15).
•
Re-tighten the fastening nut.
•
Put the wheels and the side panel on again.
Bischoff & Bischoff GmbH |13.02.2020
PROTEGO / SL
13
14
15
59
Publicidad
Capítulos
Tabla de contenido
