Meanings Of Symbols - Hitachi CS 40EA Instrucciones De Manejo

MEANINGS OF SYMBOLS

NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
Chain saw, Portable
CS40EA
It is important that you read, fully understand
before use, and observe the following safety
precautions and warnings. Careless or improper
use of the unit may cause serious or fatal injury.
Read, understand and follow all warnings and
instructions in this manual and on the unit.
Always wear eye, head and ear protectors when
using this unit.
Warning, kickback danger. Be careful of
possible sudden and accidental upward and/or
backward motion of the guide bar.
One-handed usage not permitted. While
cutting, hold chain saw fi rmly with both hands
with thumb fi rmly locked around front handle.
Chain brake
Choke
On/Start
Off /Stop
Emergency stop
Fuel and oil mixture
Chain oil fi ll
Carburetor adjustment - Idle speed
Carburetor adjustment - Low speed mixture
Carburetor adjustment - High speed mixture
Oil pump adjustment
Priming pump
Guaranteed sound power level
4
(Original instructions)
Engine size
Spark plug
Fuel tank capacity
Chain oil tank capacity
Dry weight
(Without guide bar and chain)
kg
Guide bar length
÷ 2
Chain pitch
Chain gauge
L
p A
Sound pressure level LpA*
ISO22868
L
Sound power level LwA*
w
A
Measured by ISO 22868
ISO22868
L
Sound power level LwA*
w
A
Measured/Guaranteed by 2000/14/EC
2000/14/EC
a
Vibration level by ISO 22867
hv
Front handle*
K
Uncertainty
P
Max. engine power by ISO 7293
Max. engine speed
MAX
Idle engine speed
MIN
Type of chain
Max. chain speed
Number of teeth of drive sprocket
7
English
by ISO 22868
1
2
2
/ Rear handle*
1 1