Product Description; Intended Use; Prerequisites; Scope Of Delivery - Bosch OBD 150 Manual Original

3.

Product description

3.1

Intended use

The OBD 150 reads and displays emission-re-
lated diagnostic data via the OBD interface of
gasoline and diesel passenger vehicles. It is also
possible to erase or reset trouble codes and to
display additional electronic control unit infor-
mation and monitors. The diagnostic data can
help to establish the cause of problems in the
vehicle.
!
The OBD 150 is only to be used with the
vehicle stationary. Use whilst driving is
prohibited.
3.2

Prerequisites

OBD interface (OBD-2 or EOBD) in the vehicle
to be tested (refer also to Section "4.1 What are
OBD, OBD II, OBD-2 and EOBD").
3.3

Scope of delivery

Designation
OBD 150 diagnostic tester
Original operating instructions
USB connecting cable
Tab. 1: Scope of delivery
3.4

Description of device

Fig. 1: OBD 150

1 OBD diagnostic connector

2 Button panel

3 LCD (two-line)
Robert Bosch GmbH
Product description | OBD 150 | 29
Order number
SP02000006
569630 Rev "C"
–
3.4.1 Button panel
Fig. 2: OBD 150 buttons
Button Function
R Scrolls up through the screen display
READ
↑
when or appears on the screen.
R Reading of electronic control unit diag-
nostic data (press and hold for 2 sec-
onds).
R Scrolls down through the screen dis-
ERASE
play when or appears on the screen.
R Erasing of trouble codes in electron-
ic control unit (press and hold for 3
seconds).
R Resetting of inspection and main-
tenance monitors in electronic con-
trol unit.
E
Go to function selected.
z
Return to previous menu or to diagnos-
tic menu
Tab. 2: Buttons and their functions
3.4.2 OBD diagnostic connector
This connects the OBD 150 to the OBD diagnos-
tic socket in the vehicle.
3.5

Updating software

You can install software updates to OBD 150
using the USB connecting cable contained in the
scope of delivery.
i
We will make software updates avail-
able for download on our internet page:
http://de.bosch-automotive.com/en/parts/
parts_and_accessories/electronics_and_
accessories/on_board_diagnose/obd_2/obd_6
3.6

Cleaning

!
Do not use abrasive cleaning agents and
coarse workshop cloths.
¶
The housing is only to be cleaned with a soft
cloth and neutral cleaning agents.
569630 Rev "D"
en
|
2016-02-19