Bornay 600 Manual De Usuario página 60

solidity. To secure this reinforcement we use wide-series washers and normal
M10 nuts. With the help of a dynamometric Allen key, all nuts must be initially
tightened to 2 kg. Once tightened, all nuts must then be retightened to 2.5 kg:
The next step, having retightened all nuts, is to insert a wide-series M-10 down,
The next step, having retightened all nuts, is to insert a wide-series M-10
washer. These washers will support the frontal nose cone, which is the next part
to install. Once installed, another washer and M-10 self-blocking nut are
applied. Observe the previous illustrations carefully.
CAUTIONN:
Double check that blades fit
perfectly
obstacle will get in their way.
 PRECAUTION:

Do not manipulate the windmill and its control panel on windy days.
and that no
Bornay 600 – Rev 6.0 - P 60
 WARNING:
Check blades are correctly
mounted in the right place;
the Bornay logo must be to
leeward, on the reverse side