Water; Rinsing Water Does Not Flow; Water Tank Overflows - Protec ECOMAX Manual De Instrucciones

Trouble Shooting
8

Water

8.1 Rinsing water does not flow

• The water pressure in the water supply system is too low: Minimum pres-
sure 2 bar (29 psi).
• The valve opens, but no water flows through: the coarse filter on the intake
end is blocked.
• Check the water supply hose in the machine.

8.2 Water tank overflows

• The water drainage hose (overflow) should be laid out with constant
descent. The hose end should be positioned above the drainage level in
the syphon.
• Check water drain opening in the tank and the hose for blockage and resi-
dues.
• When extreme algae growth is registered, the overflow can be connected
directly to the fitting of the water tank.
9 Shutting off time-controlled replenishment / anti-oxidation
The anti-oxidation function can be shut off at the controller. To do so, set the DIP
switch on the controller as shown in the figure.
36
Antioxidation 5s / 20min
ON
OFF
ECOMAX
TM