Formatting MG Memory Stick
(quick format)
MG Memory Stick can be formatted.
1
Press the [FUNC] button.
The function mode is activated.
Turn the [SEL] button to select
2
Memory Stick.
The selection item is highlighted.
3
Press the [SEL] button.
The Memory Stick setting mode is
activated.
The format mode is activated, then
[OK?] message will appear.
Press the [SEL] button for more
4
than two seconds.
MG Memory Stick will be formatted.
5
Press the [RTN] button.
At this time, other adjustments can
also be made in Memory Stick
setting mode.
6
Press the [RTN] button.
At this time, other adjustments can
also be made in function mode.
Press the [FUNC] or [RTN] button
7
to exit function mode.
ATTENTION
Do not turn off the power or the ignition switch
while formatting. The formatting process will
be interrupted and the data may be corrupted.
How to operate the Memory Stick player
Ejecting the Memory Stick
Press the [CD
1
than one second.
The front panel opens.
2
Eject the Memory Stick.
Lightly press the Memory Stick once.
ATTENTION
The Memory Stick will not eject by itself. Lightly
press the Memory Stick to eject.
CAUTION
• Do not drive with the front panel open.
The panel may cause unexpected
personal injury during a panic stop or
abrupt changes of the vehicle motion.
• Do not attempt to close the front panel
with your hand. Doing so may damage
the panel.
Press the [CD
3
than one second.
The front panel closes.
] button for more
] button for less
27
V