Operations During Advance Mode - Eclipse CD5000 Manual Del Propietário

Operations during Advance Mode

1
Press the [SOUND] button for more than two seconds.
The mode switches between normal mode and advance mode each time the button is
pressed. During advance mode, "ADVANCE MODE ON" and the scroll display appear
on the display.
ATTENTION
If you press the [SOUND] button during sound adjustment mode, the adjustment mode is canceled
and the mode returns to normal music mode.
CAUTION
When switching between Normal Mode and Advance Mode, please make sure that the volume
level is set to 0.
2
Turn the [SEL] button to select a setting item.
When the button is turned, the setting item changes in the following order and the
selected item is highlighted.
Press the [SEL] button to select the setting item. After selecting the setting item, follow
the procedures in the list below.
SRS Circle Surround II (CS II)
1
Turn the [SEL] button.
In the Hi and Low settings, Loud and Position can not be
changed.
2
Press the [SEL] button.
3
Turn the [ ] button.
When CSII is HI or Low, TruBass can be turned ON/OFF.
ATTENTION: If the CSII is set (to a setting other than OFF), the BAL (balance) and FAD (fader) settings
will be canceled.
How to operate the Sound Adjustment Mode
... Low
➔ ➔ ➔
OFF Hi Low ...
XI
61