Stallonamento E Smontaggio Dello Pneumatico; Tyre Bead Breaking And Demounting - SICE S50A Mobile Manual De Instrucciones

Use the OPENING/CLOSING control to open the turntable spindle until it is locked on the inner circumference of the rim.
Check that the wheel is correctly centred and securely locked.
WARNING: Make sure that the rim is correctly and firmly locked on every gripping point of the clamp. Use the pressure
gauge to check that the wheel has been locked by reaching the maximum operating pressure.

2.2 Stallonamento e smontaggio dello pneumatico

2.2 Tyre bead breaking and demounting

S50A Mobile tyre changer can be used for wheels from 14 to 26 inches with a maximum width of 21" (520 mm). Tyres of
Lo smontagomme AGT TILT può essere usato per ruote da 14 a 26 pollici con larghezza massima di
steering and driving axles can be mostly considered as "Standard" tyres for the purposes of this manual. Wide-base
degli assali sterzanti e di
models, Supersingle/ Michelin® X One®, and certain rims are considered as "more demanding".
a base larga, Supersingle /
Standard tyres/wheels
Pneumatici/ruote standard
Position both the bead breaking rollers in the tyre trolley.
Procedere con lo smontaggio dello pneumatico partendo dal lato esterno.
Iniziando dal tallone esterno, portare il rullo stallonatore esterno in posizione di lavoro.
Starting from the external bead, move the external bead breaking roller into the working position.
Utilizzare i comandi di avvicinamento/allontanamento e sollevamento/abbassamento per portare il rullo stallonatore a battuta sul
Use moving closer/moving away and lifting/lowering controls to move the bead breaking roller until it sits into place on
fianco dello pneumatico.
the tyre side.
The rim edge must not be at more than 5 mm (3/16") from the upper end of the bead breaking roller.
S50A Mobile Operator's Manual
Pneumatico non illustrato per motivi di chiarezza.
mm). Gli pneumatici
51