Attila PRDF 1060 Instrucciones De Uso Consejos Para La Instalación página 151

8 - INSTALLATION
INSTALLATION
This cookers has class "2/1" overheating protection so that it can be installed in a
cabinet.
The appliance must be kept no less than 50 mm away from any side wall which exceed
the height of the hob surface (fig. 8.1).
The furniture walls adjacent to the cooker must be made of material resistant to heat.
The veneered syntetical material and the glue used must be resistant to a temperature of
90°C in order to avoid ungluing or deformations.
The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room but not in a
room containing a bath or shower.
Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.
It is essential that the cooker is positioned as stated below.
The cooker must be installed by a qualified technician and in compliance with a
local safety standards.
Fig. 8.1
151