Fabric Upholstery Care; Metal Framework; Cleaning And Care; General Maintenance - Zippie Pluton Manual De Usuario

23.0 Cleaning and Care

We recommend the following points for successful cleaning of your equipment:
NOTE: It is possible that some surface wrinkling may occur following these processes.

Fabric Upholstery Care

Refer to Sunrise Medicals seperate fabric cleaning guide which can be found on their website www.Sunrise
Medicalseating.co.uk or in hardcopy format from the Sunrise Medical office. Do not use bleach, acidic, solvent, abrasive,
biological or phenolic based cleaners.

Metal Framework

• If all upholstery is removed the metal framework can be cleaned with hot soapy water and detergent or it can be
steam cleaned. (Labelling may need to be replaced following steam cleaning).
• Ensure that the framework is thoroughly dried after cleaning.
• Always ensure that any moving or adjustable parts are re-lubricated.

24.0 General Maintenance

General maintenance should be carried out by a competent, professional person who is well informed on how to use the
equipment (see warranty - page 33) if there is no such person available or a more thorough check is needed, a service
via an approved repairer (see opposite) should be booked. The person who carries out the maintenance check or service
should always fill out the service history log record (page 32) in order to ensure the warranty remains valid.
As documented opposite, the degree of maintenance required is dependant on various factors relating to the use of the
product. In addition to the specific functional adjustment warnings specified in this manual, it should be ensured that a
thorough inspection of the following should be completed at no greater than 6 month intervals:
NOTE: Please see the Maintenance Table on the next page.
NOTE: Points listed here are generic across the Sunrise Medical range and do not apply to all products.
30
Pluton Rev.1.0