Tabla De Contenido; Contents - Zippie Pluton Manual De Usuario

Contents

Measurements & Usefull Information
Introduction
Use
Area of application
Contents
Definitions
Definitions of words used in this manual
1.0 Important Safety Advice
2.0 Warranty
3.0 Brakes
Operating Brakes, (Indoor Base Frames)
Applying Brakes
Releasing Brakes
4.0 Chest Harness-Adjustments
Chest Harness
Fixing Onto Chair
Fastening of Belts
Lap Strap Fitting
5.0 Lap Strap Safety
Harness and Lap Strap Positioning
Adjustment Points Underneath Seat, (Fig.6.1)
6.0 Adjustment Points and Lever Use
Effective Operation of Lock Levers
Using The Index Plungers
Pad/ Shoulder Width
Pad/Protraction Angle
7.0 Lever Use-Using Index Plungers
8.0 Adjusting Shoulder Protector Pads
Mounting
9.0 Seat Unit
Removal
Manual Seat Height Adjustment
Powered Base Height Adjustment
Multi Height & Tilt Base (Fig.10.1-10.3)
Multi Height and Tilt Base (Fig.11.1-11.2)
10.0 Tilt In Space
11.0 Folding Push Handle
To Raise The Chair
To Lower The Chair
To Perform the Tilt in Space on the 5 Star Base
12.0 5-Star Base Adjustment
Back Angle Adjustment
Back Height Adjustment
13.0 Back Rest Adjustment
Adjusting The Seat depth (Fig14.1)
Tray Fitting Instructions (Fig 15.1-15.2)
14.0 Seat Depth Adjustment
15.0 Fitting A Tray
Sacral Pad Adjustment (Fig.16.1)
Hip Pad Adjustment (Fig.16.2)
16.0 Pad Adjustment
Thigh Pad Adjustment (Fig.16.3-16.5)
Adjusting The Wing Angle
Adjusting the Headrest Angle
Adjusting the Headrest Height
Height & Width of Supports
Flip Away Action (Where Fitted)
6
(Where Fitted)
(locking Variety Only)
4 17.0 Headrest Adjustment
5 18.0 Lateral Support Adjustment
5 Adjusting Arm Height
5 Adjusting Arm Angle
6
Removing The Armrest
7 19.0 Arm Rest Adjustment
7 Split Option:
8 Angle Adjustment
9 Removing the Leg Stem
10 20.0 Legrest Adjustment/Removal
10 Footplate Angle Adjustment
10 Flipping Up the Footplate
10 Footplate Height
10 Foot Holder Positioning
10 Foot Size
11 21.0 Foot Position Adjustment
11 Fore and Aft, Rotation
11 Side to Side/Width Adjustment
11
Foot Straps
12 Setting the Strength of Resistance & Power of Return 28
13 Increasing the Air Pressure
13 Decreasing the Air Pressure
22.0 Dynamic Back Set Up
13
Setting The Power of Return
14
14 Disengaging the Mechanism
14 Maintenance Schedule
14 Fabric Upholstery Care
14 Metal Framework
15 23.0 Cleaning and Care
15 24.0 General Maintenance
16 What should be completed during a service?
16 What happens if a fault is found?
16 Who should carry out the service?
17 Frequency of Service
17 How To Book A Service
17 25.0 Servicing by Approved Dealer
17 26.0 Service Record Log
27.0 Warranty
18
18 Cleaning
18 Assessment of Fabrics / Foams
18 Electrical and Electronic Equipment Decomissioning
19 Appropriateness of Equipment
19 Manuals and Records
19 Inspection
20 Condition
20 28.0 Inspecting and Reissuing of Equipment
20 Accessories
20 Function
21 Fixings
21 Modifications
21 Labelling
22 Adjustment
23 Hand Over
23 Packaging
23 Handle Fitting
23
23
23
23
24
24
24
24
25
25
25
25
26
26
26
26
26
26
27
27
27
28
28
28
29
29
29
30
30
30
30
32
32
32
32
32
32
33
34
35
35
35
35
35
35
35
35
36
36
36
36
36
36
36
36
36
Pluton Rev.1.0