Specialist Functions; Windchest Panning; Changing The Volume And Brilliance - Roland C-190 Manual Del Usuario

C-190 Portable Organ

Specialist functions

7. Specialist functions
This chapter discusses functions you may only need occasionally. They help you refine the C-190's behavior.

Windchest Panning

Use the WINDCHEST PANNING function to specify
where the simulated organ pipes (the C-190 is a dig-
ital instrument with no pipes whatsoever) should be
located in the stereo sound field.
The available settings represent common pipe arrange-
ments for church organs.
The following can be set for each organ voice individu-
ally. The settings can be saved to the global area (see
p. 19).
(1) Press the [WINDCHEST¥PANNING] button.
The button flashes. All tilt tab indicators go dark.
(2) Press the tilt tab of the organ voice whose panning
you wish to change.
This can be a tab of any section (PEDAL, MANUAL I or
MANUAL II). Its indicator starts flashing.
(3) Use the [DOWN] and [UP] buttons to select one of
the four available settings.
20
The drawings are probably self-explanatory:
(4) Press the [WINDCHEST¥PANNING] button again to
return to normal operation.
From now on, the rank you selected will use the
changed stereo distribution. Do not forget to save
the setting to the global area.
IRecalling the default Windchest Panning set-
tings
If you decide to return to the factory-set panning
settings, hold down the [REC] button while switching
the C-190 on (this initializes all of the C-190's set-
tings).

Changing the volume and brilliance

The C-190 provides two functions that allow you to
change the volume and brilliance (filtering) of any
organ or orchestral sound. Such changes can be
saved to the global area.
Changing the volume of just one sound at a time
If you think a given organ or orchestral sound is too
loud (or too soft) with respect to the others, you can
decrease (or increase) its volume without changing the
volume of the remaining sounds. This is therefore a bal-
ance setting.
(1) Press the [ORCHESTRA] button to switch it on or
off.
Switch it off if you need to change the volume of an
organ sound. Switch it on to change the volume of
an orchestral sound.