Basic Weighing Function - Sartorius Entris Serie Instrucciones De Funcionamiento

Basic Weighing Function

Features
– Tare the balance
– Printing weights
Preparation
Switch on the balance:
t
Press the e key
Tare the balance, if necessary:
t
Press the w key
Example
Simple Weighing
Step
1. Switch on the balance
Self-test is performed,
followed by automatic
initial tare function.
2. Place container on weighing pan
(in this example 11.5 g).
3. Tare the balance.
4. Place sample in container
(in this example: 132 g).
5. Print weight.
y If necessary, change the configuration
settings:
see the chapter entitled "Configuration"
y If desired, load the factory settings:
see the chapter entitled "Configuration"
Additional Functions:
y Switching off the balance:
Press e
Press key Display | Printout
e
+
e
+
r
N
0.0 g
11.5 g
0.0 g
132.0 g
+ 132.0 g
13