Press the switch-on/ stand-by/ supply button
supply two cups (approximately 150 ml each) of water.
Allow the descaling solution to work for about 15-20
minute.
Switch the machine on by pressing the switch-on/
stand-by/ supply button
in steps
and
.
Repeat the steps described in point
tank is completely empty.
Remove the tank and rinse it with fresh drinking water.
Fill it completely.
MAINTENANCE AND CLEANING
then
then proceed as described
until the water
31
Switch the machine on by pressing the switch-on/
stand-by/ supply button
. Place a suitable container
under the dispenser. Press the switch-on/ stand-by/
supply button
then supply the full content of the
tank.
When the water is finished, refill the tank and repeat
the steps described in point
cycle has been completed, remove the container and
empty it.
EN
. When the decalcifying