ABAC Boxy Manual De Instrucciones página 7

GB
Preserve this handbook for future reference
Before using the compressor, read the instructions for use carefully and
comply with the following safety precautions. Consult this handbook if
you have any doubts regarding functioning
Preserve all the documentation so that anyone who uses the
compressor can consult this beforehand.
1
SAFETY RULES
This symbol indicates warnings to be read before using the product so as
to prevent injury to the user.
Compressed air is a potentially dangerous form of energy; always take
great care when using the compressor and its accessories.
Warning: the compressor may restart when power is restored following
a blackout.
DO'S
- The compressor must be used in a suitable environment (well ventilated
with an ambient temperature of between +5°C and +40°C) and never in
places with dust, acids, vapors, explosive or flammable gases.
- Keep the work area free. When operating, the compressor must be placed
on a stable surface.
- Safety goggles should be worn when using the compressor in order to
protect the eyes against any foreign bodies lifted by the jet of air.
- If possible, when using air-powered accessories, wear safety clothing.
- Always maintain a safety distance of at least 3 meters between the
compressor and the work area.
- Insert the plug of the electrical cable in a socket of suitable shape, voltage
COMPONENTS (fig. A)
1 On/off switch
8.9.10 Inflation adapters
11 Inflation gun
12 Rubber hose (5 m)
13 Air nozzle
14 Housing for accessories, rubber hose and power cable
15 Power cable
2
CONNECTING ACCESSORIES TO THE COMPRESSOR
Before connecting accessories, always make sure that the compressor
is OFF.
All the accessories are connected to the compressor using the rubber
hose (12) fitted with fast connects.
Connect the accessory required to end (C) of the rubber hose (fig. 3)
pushing fitting D of the accessory firmly inside C. A click indicates that the
accessory is connected.
When you have finished using the compressor, disconnect the rubber hose
from the accessory (fig. 4) pulling back the ring-nut of connector C.
3
USE OF THE COMPRESSOR
Connect the accessory required. Connect the compressor to the mains using
the power cord 15 located in housing 14 on the front of the compressor.
Press switch 1 to start the compressor.
When you have finished using the compressor, press switch 1 and disconnect
the power cord 15 from the current outlet, replacing it in housing 14 on the
front. Run the accessory connected dry until there is no more compressed
air in the hose.
It is good practice to stow all the accessories in housing 14 on the front of
the compressor.
and frequency complying with current regulations.
- Use extension cables with a maximum length of 5 meters and with a cable
cross-section of not less than 1.5 mm
length and cross-section and also of adapters and multiple sockets should
be avoided.
- Always use the handle to move the compressor.
- When using compressed air, you must know and comply with the safety
precautions to be adopted for each type of application (inflation, air-
powered tools, painting, washing with water-based detergents only,
clinching, etc.).
DON'TS
- Never direct the jet of air towards persons, animals or your body.
- Never let the compressor come into contact with water or other liquids
and never direct the jet of liquids sprayed by tools connected to the
compressor towards the compressor: as the appliance is live, this could
cause electrocution or short-circuits.
- Never use the appliance with bare feet or wet hands or feet.
- Never yank the power cable to disconnect the plug from the power outlet or
to move the compressor.
- Never leave the appliance exposed to adverse weather conditions (rain,
sun, fog, snow).
- Never allow inexpert persons to use the compressor without suitable
surveillance. Keep animals at a distance from the work area.
- The compressed air produced by the compressor cannot not be used for
pharmaceutical, food or medical purposes or to fill the air bottles of scuba
divers.
- Do not place flammable or nylon/fabric objects close to and/or on the
compressor.
- Do not cover the air inlets on the compressor.
- Do not open or tamper with any part of the compressor. Contact an
authorized Service Center.
Always wait at least 10 seconds from when the compressor has been
switched off before restarting this.
This compressor is suitable for minor blowing and dust removal jobs.
It is NOT suitable for prolonged use, for treating large surfaces and for
removing dust from badly-caked areas.
The compressor must be used in the horizontal position only, resting on
its rubber feet.
MAINTENANCE
Never clean the machine and its components with solvents, flammable or
toxic liquids. Us only a damp cloth making sure you have unplugged the
compressor from the current outlet.
4
INFLATION GUN
For inflating tires, rubber dinghies, air beds, footballs and other objects
Warning: Do not direct the jet of compressed air towards people or
animals.
Never inflate the objects above the recommended inflation pressure as
this may be dangerous and cause damage and/or injuries.
The gun is not suitable for inflating car tires. For this operation, use of the
approved inflation gun that can be purchased separately is recommended.
USE
1) Connect the inflation gun 11 to the compressor as explained in chapter
"2 - CONNECTING THE ACCESSORIES TO THE COMPRESSOR"
2) When inflating tires or certain bicycle tires, it is not necessary to insert
any of the adapters (fig. 7). Press tab E (fig. 5) and connect the hose
of the gun to the tire pushing the fitting on the valve and then releasing
the tab.
5
. Use of extension cables of different
2