Declaration Of Conformity 3.1 Polymax - Dreve Polymax 1 Manual Del Usuario

Polymax 1, 1/120 °C, 3 and 5
3. Declaration of conformity
3.1 Polymax 1
Low Voltage Directive (2006/95/EG).
We herewith declare that the machine described below is in its conception and design and
in the shape delivered by us in accordance with the fundamental requirement for safety and
health as prescribed in the applicable EEC-guidelines.
In case of any change or modification of the machine not authorised by us this declaration
becomes invalid.
Denomination of the machine: Polymax 1/95°C
Type of machine:
Applicable EC directives:
2006/95/EG
2004/108/EG
Applied harmonised standards:
2006/95/EG
EN 61010-1: 2010
EN 61010-2-010: 2003
2004/108/EG
EN 61000-3-2:2006 +
A1:2009 + A2:2009
EN 61000-3-3:2008
EN 61326-1:2006
Dreve Dentamid GmbH · Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-0 · Fax: +49 2303 8807-55 · E-Mail: dentamid@dreve.de · www.dreve.com
32
D-3429/D-3429-A/D-34291/D-34291-A
Pressure polymerisation unit
Low Voltage Directive
EMV Directive
Low Voltage Directive
Safety requirements for electrical equipment for measurement,
control and laboratory use – Part 1; General requirements
(IEC 61010-1:2010 + Cor.: 2011); German version EN 61010-
1:2010.
Safety requirements for electrical equipment for measurement,
control, and laboratory use – Part 2-010: Palticular requipements
for laboratory equipment for the heating of materials (IEC
61010-2-010:2003); German version EN 61010-2-010:2003.
EMV Directive
Electromagnetic compatibility (EMC) – Part 3-2: Limits –
Limits for harmonic current emissions (equipment input
current <= 16 A per phase) (lEC 61000-3-2:2005 + A1:
2008 + A2:2009); German version EN 61000-3-2:2006
+ A1:2009 + A2:2009.
Electromagnetic compatibility (EMC) – Part 3-3: Limits –
Limitation of voItage changes, voltage fluctuations and
flicker in public low-voltage supply systems. for equipment
with rated current <= 16 A per phase and not subject to
conditional connection (IEC 61000-3-3:2008); German
version EN 61000-3-32008.
Electrical equipment for measurement, control and laboratory
use – EMC requirements Part 1. General requirement
(IEC 61326-1:2005); German version EN 61326-1:2006
Emission according to living area, business and industrial
undertakings as well as small enterprises interference
stability according to industrial area.