Listening To The Radio - AEG SR 4842 BTS Instrucciones De Servicio

English
32

Listening to the Radio

Hints for FM Reception
• The FM reception depends on the location.
Follow the steps below:
- Completely extend the telescopic antenna.
- If necessary, change the position of the telescopic
antenna to improve the reception.
• Depending on the location, some station may not be
received in your region or only with interference. This is
not a malfunction of the device!
Scan FM Stations
1. Select the radio mode with the M button.
2. You have two possibilities to look for and store radio
stations.
Automatic Station Scan
Important! Any previously stored radio stations will be
overwritten. The device searches only for the strongest
stations. Up to max. 30 stations will be memorized with
this. Depending on the location, the number of detected
stations can differ widely.
Press and hold the / button for approx. 3 seconds.
The device is searching the complete FM frequency band
for radio stations. The stations found are stored ascend-
ing by frequency.
Tune the desired stations with the
tons. When holding down either of the buttons, the
device will start scanning until the next radio station is
found. The display will show the respective frequency.
The manually tuned stations cannot be stored.
Cycling through the stored stations
You can cycle through the stored stations by repeatedly
pressing the / button.
Playing Back Music Files
There are two ways to play music files: using a cable or
cordless via Bluetooth.
By Cable (Cable not included)
1. If required, use a suitable adapter (not included).
Connect the external device as follows:
• Connect to the AUX-IN socket using a 3.5 mm stereo
jack plug cable.
2. Use the M button to select AUX mode.
3. Start the playback of your audio source. Listen to the
sound playback via the speaker.
4. For the further procedure, please refer to the user manual
of the external audio source.
NOTE:
If possible, adjust the volume of the external unit to a
comfortable level.
SR4842BTS_IM
Playing Back Music via Bluetooth
Bluetooth involves a technology for wireless radio connection
of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-en-
abled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device.
The A2DP profile involves a multi-vendor Bluetooth profile.
By streaming, stereo-audio signals are wirelessly transferred
between the playing device (source) and the receiving
device. To be able to remotely control the source, the play-
back device must support the AVRCP profile (Audio Video
Remote Control Profile.
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on Devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
+ and but-
1. Ensure, that the Bluetooth function is activated in your
player (e. g. mobile phone). For this, refer to the operation
manual of your player.
2. Use ther M button to select BLUETOOTH mode. "
starts flashing in the display. Shortly after that you will hear
the speaker announcing "PAIRING". This signalizes that
the device is in pairing mode.
3. Choose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device "AEG SR 4842 BTS" will
show in your player as a selection.
NOTE:
• Only one playback device can be connected with
• Keep the /
4. Now enter the password "0000" in your player, depend-
ing on the device manufacturers, model, and software
version.
After successful registration, "
hear the speaker announcing "CONNECTING". For the
further procedure, please refer to the user manual of the
playback unit. If possible, adjust the volume of the external
unit to a comfortable level.
the device at one time. If the device is already
connected with another playback device, the device
will not appear in the BT selection menu.
button pressed to disconnect
an existing Bluetooth connection. "
flashing in the display.
" appears and you will
"
" starts
23.09.16