Tabla de contenido
Publicidad
1
2
I
I
I
3
Zippers and piping
I
Set the machine as illustrated. Dial selector on " _ "
I
Set machine
as illustrated
on the left.
Set stitch length control
between
"1"
thickness of fabric).
"4"
(according
to
Change
to zipper
foot. (1)
The zipper foot can be attached right or left, depending
on
which side of the foot you are going to sew. (2)
To sew past the zipper tab, lower the needle into the fabric,
raise the presser foot and push the zipper tab behind the
presser foot. Lower the foot and continue to sew.
It is also possible to sew a length of cord into a bias strip to
form a "welt" or piping. (3)
52
Publicidad
Tabla de contenido
