Connecting The Machine; Polarized Plug Information - Singer 4166 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CONNECTING THE MACHINE

Place the machine on a stable table.
1.Connect the power line cord to the
machine by inserting the 2-hole plug into
the terminal box.
2.Connect the power line plug to the
electric outlet.
3.Turn on the power switch.
4.A lamp will light up when switch is turned
on.
To disconnect, turn the power switch to the
off position, then remove plug from outlet.
!
DANGER:
-To reduce the risk of electric shock.
Never leave the machine unattended when plugged in. Always unplug this machine from the
electric outlet immediately after using and before maintenance.
!
WARNING:
-To reduce the risk of burns, fire, electric shock,
or injury to persons.
Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.

POLARIZED PLUG INFORMATION

This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electric shock, this plug is intended to
fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician to install the proper
outlet. Do not modify the plug in any way.
1 1
-7-
2 2

Publicidad

Tabla de contenido
loading

Tabla de contenido