Section 3. Basic Sewing Straight Stitch Sewing; To Change The Direction - Janome 1706 Manual De Instrucciones

q w
SECTION 3. BASIC SEWING
e
Straight Stitch Sewing
q Pattern selector:
w Presser foot:
e Thread tension:
z Raise the presser foot and position the fabric
with its edge lining up with a seam guide line
on the needle plate.
Lower the needle into the fabric.
Lower the presser foot and smooth the threads
toward the back. Depress the foot control.
Gently guide the fabric along the guide line
letting the fabric feed by itself.
x For fastening the end of seams, press the
reverse stitch button and sew several reverse
stitches.
Raise the presser foot and remove the fabric,
drawing the threads to the back.
c Cut the threads with the thread cutter.
The threads are now the proper length to begin
sewing the next seam.

To change the direction

Stop the machine and turn the handwheel
toward you to bring the needle down into the
fabric. Raise the presser foot.
Pivot the fabric around the needle to change
sewing direction as desired.
Lower the presser foot and continue sewing.
22
A1 – B
Zigzag foot
2–6