Programmed Play; Cleaning And Maintenance - AEG SR 4346 CD/MP3 Instrucciones De Servicio

(17)
When an audio CD, or a CD in MP3 format or file is playing:
Press once = (the
emits a fixed light) the current
track is repeated continuously.
Press twice = (the ALL emits a fixed light) the
whole CD is played continuously.
Press three times = all functions are cancelled. The normal
play mode is resumed.
Only for CDs in MP3 format or files which are playing:
Press once = the current track is repeated continu-
ously (
Press twice = the selected folder of the MP3 CD is
repeated continuously (
appears in the display).
Press three times = the whole CD is played continuously
( ALL appears in the display).
Press four times = the function is deactivated and the CD is
played in the normal mode.

Programmed Play

This can be used to program any desired sequence of tracks.
1. Press the CD STOP button (14).
2. Press the "P" button (16). "P01" (preset location) appears
on the display and PROG flashes on the display. Use the
/ buttons (6/7) to select the desired track and then
press the "P" button again. The display changes to
memory slot P02.
3. Select the next track with the / buttons and press the
"P" button again. Repeat the procedure until all the
desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be pro-
grammed has been reached "FUL" flashes in the
display.
4. Press the PLAY/PAUSE button (9). The playback starts.
The first selected track number is shown on the display,
the message " CD" or " MP3" and PROG is shown
on the display.
5. Press once the CD STOP button to stop the playback
while retaining the program.
6. To play the programme back again, press the
PAUSE button.
7. To delete the program, press the CD STOP button
twice. The PROG control lamp goes out.
The device stops automatically once the entire sequence
of programmed tracks is completed. The programmed
sequence is kept in memory until you switch to a different
mode or until the CD or the storage device is removed or the
unit is switched off.
appears in the display).
FOLDER
PLAY/
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under "Playing
CDs/MP3". Tracks can be programmed as described under
"Playing Back Programmed Tracks".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not
a malfunction of the device.

Cleaning and Maintenance

• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course
CD can not be CD is not inserted
played back. or inserted incor-
rectly.
Batteries too weak. Insert new batteries
CD jumps dur- Check the disc for
ing playback. fingerprints, dirt or
scratches.
Device cannot Device crashes and
be operated. "hangs".
English
33
Solution
Ensure that the disc is
inserted with the label
facing upwards.
or operate the device
with the mains lead.
Check the disc for
fingerprints, dirt or
scratches.
Disconnect the power
supply for 5 sec. Then
switch the device on
again.