Product Specifications - Baja motorsports AT250UT Manual Del Operador

DIMENSIONS AND DRY MASS:
Overall length ......................................76.38 in. (1940 mm)
Overall width ........................................41.34 in. (1050 mm)
Overall height ...................................... 45.67 in. (1160 mm)
Wheelbase........................................... 45.67 in. (1160 mm)
Ground clearance ....................................6.10 in. (155 mm)
Minimum turning radius .............................114.17 in. ± 8 in.
Seat height ............................................31.89 in. (810 mm)
Dry weight................................................. 485 lbs. (220 kg)
ENGINE:
Type ................................................. Four stroke, air cooled
Number of cylinders........................................................... 1
Bore and stroke ......................................... 71 mm x 58 mm
Displacement ...................................................... 229.0 Cm
Compression ratio ....................................................... 8:7:1
Carburetor ................................................Constant velocity
Air cleaner ............. Paper with polyurethane foam element
TRANSMISSION:
Primary reduction system .................................... Spur gear
Primary reduction ratio ...................................73/22 (3.318)
Secondary reduction system ..............................Shaft drive
Secondary reduction ratio.................. 19/18 x 46/11 (4.414)
Transmission type ....................................... Constant mesh
5 speeds forward, 1 speed reverse
Operation ................................................................ Left foot
GEAR RATIO:
1st ...................................................................34/12 (2.833)
2nd..................................................................34/19 (1.789)
3rd ..................................................................29/22 (1.318)
4th...................................................................26/25 (1.040)
5th...................................................................23/28 (0.821)
Reverse ......................73/22 x 34/12 x 19/18 x 46/11 (41.5)
WARNING:
This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
CALIFORNIA PROPOSITION 65

PRODUCT SPECIFICATIONS

2900 mm ± 200 mm
BAJA MOTORSPORTS
1428 Pearman Dairy Road
Anderson, SC 29625
Phone 1-888-863-2252
www.bajamotorsports.com
32 — English
ELECTRICAL:
Ignition type ...................................................................CDI
Generator system .......................................... A.C. Magneto
Battery type, voltage, capacity......... 12N14-BS, 12V, 14AH
Headlight ................................................. 12V, 30w/30w x 2
Tail light.................................................... 12V, 21w/15w x 1
Neutral indicator ................................................12V, 3w x 1
Reverse indicator...............................................12V, 3w x 1
High beam indicator...........................................12V, 3w x 1
LUBRICANT:
Periodic engine lubricant change .................. 53 oz. (1.57 l)
With oil filter replacement .............................. 56 oz. (1.66 l)
Total amount of engine lubricant.................... 63 oz. (1.86 l)
Total amount of gear lubricant ......................... 9 oz. (0.27 l)
3
FUEL:
Main fuel tank capacity ................................. 2.64 gal. (19 l)
Reserve fuel tank capacity ........................ 0.35 gal. (1.32 l)
BRAKES:
Brake type .......................................... Disc front, drum rear
Brake operation ............... Left hand or Right foot operation
SUSPENSION:
Front .....................................2 Spring oil dampener shocks
Rear ........................................1 Spring oil dampener shock
Front suspension travel .............................0.49 in. (12 mm)
Rear suspension travel ................................ 3.0 in. (76 mm)
TIRES:
Front ...................................................................AT22x7-10
Rear ..................................................................AT22x10-10
FRAME:
Frame type ..........................................................Steel tube
Caster angle .............................................................. 4 deg.