TFA 35.1115.IT Manual De Instrucciones página 36

Free standing
With the foldout stand, the weather station can be placed
onto any flat surface.
POSITIONING THE TEMPERATURE TRANSMITTER:
The transmitter is supplied with a holder that may be
attached to a wall with the two screws supplied. The
transmitter can also be position on a flat surface by
securing the stand to the bottom of the transmitter.
transmitter or move it slightly as this may help the signal reception.
To wall mount:
1. Secure the bracket onto a desired wall using the
screws and plastic anchors.
2. Clip the remote temperature transmitter onto the
bracket.
Note:
Before permanently fixing the transmitter wall base,
place all units in the desired locations to check that
the outdoor temperature reading is receivable. In
event that the signal is not received, relocate the
35