Joie C1721 Manual De Instrucciones página 11

Removing and storing ISOSAFE
connectors
1. To remove from the vehicle, press
the ISOSAFE adjustment button
and pull the base away from the
-2
seat.
30
2. Then press and release the
connectors from the vehicle's
ISOFIX.
31
3. To retract the ISOSAFE connectors
into the base press the ISOSAFE
-1 -2
adjustment button. &
32 32
17
30
2
-1
30
1
31
2 1
32
2
2
1
ii. Securing your Child in the Child Restraint
a. For installation with 3-point-belt
1. Please check whether the vehicle
shoulder belt guides are at proper
height when the child is in the child
restraint.
2. Position the shoulder belt through
the shoulder belt guide and pass the
waist belt through the vehicle waist
belt slots. Engage the vehicle buckle
and pull the vehicle belt to make
sure it is tightened.
33
!
Shoulder belt must pass through
shoulder belt guide.
!
Waist belt must pass through waist
belt slots.
!
The child restraint can not be used
if the vehicle safety belt buckle
(female buckle end) is too long to
anchor the child restraint securely.
!
Never use a vehicle waist-only belt
across front of child.
!
Do not use shoulder belt loose or
positioned under arm.
!
Do not use shoulder belt behind
child's back.
!
Do not allow child to slide down in
the child restraint in case of
strangulation.
33
34
1
2
18