Workplace; Preparation Of The Surface - HOLZMANN MASCHINEN FS 160L Manual De Instrucciones

12.1.2 Workplace

Choose a suitable place for the machine. Observe the safety requirements of Chapter 11 and the
dimensions of the machine from Chapter 4.2.
The selected location must ensure as well as the possibility for connection to an extraction system
a suitable connection to the electrical grid.
Make sure that the floor can support the weight of the machine. The machine must be leveled on
all bases simultaneously.
You must also secure around a distance of at least 0.8 m around the machine. Before and behind
the machine must be provided the necessary distance for the supply of long workpieces.

12.1.3 Preparation of the surface

Eliminate the preservative, which is applied for corrosion protection of the parts without painting.
This can be done with the usual solvents. Here no nitro solvent or similar means, and in no case
use water.
The use of paint thinners, gasoline, corrosive chemicals or abrasive cleaners will result in damage to
the surface!
Therefore: When cleaning, use only mild detergent
HOLZMANN MASCHINEN GmbH
N O T E
www.holzmann-maschinen.at
ASSEMBLY
34
FS 160L