Getting To Know Your Table Saw - Bosch 4100 Instrucciones De Funcionamiento

Getting To Know Your Table Saw
1. POWER SWITCH
Switch incorporates hole for use with padlock to prevent
accidental starting.
2. TABLE
Provides large working surface to support workpiece.
3. BASE / SUB-BASE
Supports table saw. Sub-base provides additional stability and
ability for easy sliding onto surfaces. Holes are provided in base
to bolt the saw to a workbench or stand.
4. BLADE BEVEL LOCK HANDLE
Locks the blade to desired bevel angle.
5. TABLE EXTENSION
Provides a larger work surface for wider workpieces.
6. TABLE EXTENSION LOCK HANDLE
Allows you to lock the table extension at desired distances. Also
prevents use of table saw with unlocked extension.
7. ELEVATION WHEEL
Elevates or lowers the blade. Also used to tilt the blade 0 to 45
degrees.
8. BLADE BEVEL SCALE
Shows the degree the blade is tilted.
9, RiP FENCE SCALE
Shows the distance from the blade to rip fence through a
convenient viewing and magnifying window. Lower portion of
scale can be used up to 13.5 inches. Upper portion of scale is
used for cuts beyond 13.5 inches.
10. MITER GAUGE
Head can be locked in desired position for crosscutting or
mitering by tightening the lock knob. ALWAYS SECURELY
LOCK IT WHEN IN USE.
11. RiP FENCE STORAGE
Conveniently stores rip fence when not in use.
12. PRE-CUT (KERF) INDICATOR
Allows you to mark and locate exactly where the blade will enter
the workpiece.
13. MITER GAUGE STORAGE
Conveniently stores miter gauge when not in use.
14. BLADE STORAGE & WRENCH
Allows you to store 10" blades and arbor wrench.
15. HEX WRENCH
Hex wrench for removing the blade guard and adjusting various
hex heads on saw.
16. CORD WRAP
Allows you to easily secure the cord so it's out of the way when
transporting or storing.
17. VACUUM HOOK-UP
Your table saw is equipped for vacuum hook-up. This feature will
allow you to attach any 2-1/4" vacuum hose into the dust port
provided for convenient sawdust removal. An adaptor is available
for use with alternate hose sizes.
18. RiP FENCE
Exclusive Self-Aligning, Squarelock rip fence can be easily
moved or locked in place by simply raising or lowering lock
handle.
19 18
21 12
2 10
13 1 4 7
|
11
16
17
23
22
20.