Ferroli FORCE B Instrucciones De Uso, Instalación Y Mantenimiento página 127

FORCE B
Heating temperature reduction
Access the menu "Reduction Adjustment Temp" to vary the temperature from a minimum of 0°C to a maximum of
50°. Confirm with the OK button.
This parameter is used only if time programming is activated. See *** 'Time programming' on page 128 ***
A
DHW temperature reduction adjustment (with optional hot water tank installed)
Access the menu "Adjustment Temp" to vary the temperature from a minimum of 10°C to a maximum of 65°C. Confirm
with the OK button.
B
The boiler is sold with time program not activated. Therefore, if requested, this is
the setpoint value.
DHW temperature reduction (with optional hot water tank installed)
Access the menu "Reduction Adjustment Temp" to vary the temperature from a minimum of 0°C to a maximum of
50°C. Confirm with the OK button.
This parameter is used only if time programming is activated. See *** 'Time programming' on page 128 ***
A
EN
CH setpoint reduction
35
to confirm
fig. 13
CH setpoint
65
to confirm
fig. 14
DHW setpoint reduction
25
to confirm
fig. 15
cod. 3541T170 - Rev. 00 - 09/2019
127