Brother PT 9500PC Guia Del Usuario página 24

■ Cleaning the print head and head roller
If the print head is not cleaned by the self-
cleaning function, use the following
procedures to clean the PT-9500PC.
Turn off the PT-9500PC.
1
Press the cover release button and open
2
the tape compartment cover.
Remove the tape cassette.
3
Use a cotton swab to clean the print head
4
and head roller.
Print head
Cotton swab
Print head
Head roller
Cotton swab
Install the removed tape cassette, and
5
then close the tape compartment cover.
Note
●
The PT-9500PC contains a cutter to cut
printed labels. Take special care not to
touch the cutter when cleaning the
PT-9500PC.
●
The print head is very hot during use and
immediately after use. Do not clean the
PT-9500PC immediately after printing
labels.
Head roller
23