Intended Use; Technical Description; Installation - Dometic SKYSOL Instrucciones De Montaje

Powered Roofblind
5

Intended use

The Skysol Powered Roofblind is suitable for installation in yachts, boats, motor
homes, caravans or homes. The design and size of the frame are custom-made.
The fabric of the blinds is cut to the customer's specifications.
The blinds are designed for interior use only and should not be installed in bath-
rooms, wet rooms or other location with a high level of humidity.
I
NOTE
The motors have a built-in, self resetting thermal cut-out for safety reasons.
Prolonged use or over loading the blind could trigger the cut-out. If this
happens allow the motor to cool for a few minutes.
6

Technical description

The blinds are available for a connection to 12 Vg or 24 Vg.
The motor can be controlled using:
• Switches
• AP Remote control
• Central control systems
Available blind types are (see dimension drawings
page 15):
• D2: Double-ended with two fabrics, full travel
• DM: Double-ended with two fabrics meeting in the middle
• S2: Single ended with two fabrics with both fabrics at the same end, full travel
• S1: Single ended with one fabric, full travel
• SO: Single-ended, frame open at one end with one fabric, full travel
The number on the product label in the head rail indicates the blind type.
7

Installation

!
WARNING! Risk of injury
Disconnect the power supply before you begin and ensure that it can not be
reconnected until installation has been completed.
EN
Intended use
fig. j to fig. l
, page 13 ,
21