Use; Switching On And Off; Starting Vacuuming - Miele SLQL0 Instrucciones De Uso

en
If you want to alter the time of day, pro-
ceed as described above. Press the
Clock button for three seconds.
Defining the area to be vacuumed
(Fig. 10)

The robot vacuum cleaner is
85 mm high. Any items under which
vacuuming is required should have a
minimum clearance of 87 mm.
You can define any areas which the ro-
bot vacuum cleaner should not have
access to.
 Place the magnetic strip supplied
with the groove facing downwards on
the floor.
The robot vacuum cleaner will not cross
over the magnetic strip.
Adhesive strips are supplied for per-
manent fixing. Additional magnetic
strips are available to order from the
Miele webshop.

Use


Always observe the robot va-
cuum cleaner during the first clean-
ing session in a new environment
and after making changes in your
home. This way you will be able to
detect and remove any problematic
obstacles or section off the relevant
areas with the magnetic strip. You
must also check whether steps and
drops in height are recognised prop-
erly.
Your robot vacuum cleaner is equipped
with an integrated WiFi module. You
can view status information or execute
control commands using a mobile
50
device (tablet PC or smartphone).
If you would like to control the robot va-
cuum cleaner using a mobile device,
please read the section "App Scout
RX2".
The operation of the robot vacuum
cleaner via remote control and the dis-
play will be described later in this "Use"
section.

Switching on and off

 Press the Power button on the re-
mote control or any sensor on the
display.

Starting vacuuming

There are two ways to start vacuuming.
Option 1 (Remote control)
 Press the  button.
Option 2 (Display)
 Press the  sensor.
The area to be vacuumed will be
cleaned.
The robot vacuum cleaner always
cleans for at least five minutes, regard-
less of the size of the surface to be va-
cuumed.