Koenic KRVC 2320 RC Manual De Instrucciones página 19

Important notes for operation
• Do not use the robot in areas, that are
smaller than its turning radius, as the
robot might get stuck there.
• Floors and objects might be damaged, if
the brushes or other components of the
robot aren't properly assembled. Always
ensure, that all components are properly
assembles, to prevent any damages to
the floor and other objects.
• The vacuum robot might bump into the
legs of chairs, tables etc. while cleaning.
Move chairs and other objects out of
the vacuums working area in order to
prevent this and speed up and enhance
the cleaning result.
• Do not pick up the vacuum robot while
it is working (e.g. to move it to another
room). Always make sure it is turned off
before picking it up.
• Do not lay down on the floor, while the
robot is working. The rotating brushes
might get in contact with your hair,
which might cause injuries.
• Remove light or loose objects (e.g.
papers, plastic bag etc.) from the
working are of the robot. These items
could be dragged along be the robot
and block its sensors, which might lead
to the product bumping into furniture
or falling down stairs. This could lead to
damage of the product and / or furniture
as well as impairment of the cleaning
result.
• Observe the dimensions of the robot
(see technical data), to prevent it from
getting stuck, e.g. beneath cabinets.
IM_KRVC2320RC_190807_V10_HR.indb 19
English
19
7/8/2019 14:43