Koenic KRVC 2320 RC Manual De Instrucciones página 26

Size - A5
English
Technical data
Robot vacuum cleaner
Rated voltage
Vacuum power
Standard:
Powerful:
IP code
Battery charging time : 4 - 6 hours
Dust container capacity : 350 ml
Water tank capacity
Dimension (Ø X H)
Operation time
Troubleshooting
If there are any problems during operation, please refer to the following table. If problems cannot
be solved as indicated under Solution, please contact your retailer.
Note: Pay attention to the audible remarks by the robot, as these also alert you about possible
issues.
Problem
Product does not work
Product cannot absorb
dust or loose suction
power
Product does not move
Sensor malfunction
Product does not charge
Dry "stripes" remain
during wet cleaning.
Wet cleaning result is
unequal
Robot looses traction
during wet cleaning /
wheels are spinning
26
IM_KRVC2320RC_190807_V10_HR.indb 26
: 14.8 V
: 800 pa ±10%
1200 pa ±10%
: IP20
: 400 ml
: 320 mm x 85 mm
: 90 - 110 min (max.
30 minutes at 20 m ,
2
depends on the set
mode and type of
flooring)
Possible causes
• Interrupted power supply
• Battery is empty
• Filters are blocked with dirt
• Dust container full, exceed
MAX marking
• Roller are blocked.
• Product is placed on a dark
place.
• Sensor is block by dirt
• Product did not dock properly.
• Cleaning cloth not thoroughly
wetted
• A detergent has been added to
the water in the tank
Remote Control
Batteries : 2 x 1,5 V (Type AAA)
Power adaptor
Model : YLJXA-E190060
Manufacturer : Dongguan YinLi Elec-
tronics Co., Ltd
Rated Input : 100 - 240 V~ ,
50/60 Hz 0.5 A
Rated output : 19 V
Class : II
Solution
• Check the power supply
• Re-charge battery
• Clean and wash the filters
• Empty dust container
• Remove the blockage
• Place the product to a
lighter place
• Clean the sensor
• Place the product again
onto the charging station
• Soak cleaning cloth before
wet cleaning
• Clean the water tank to
wash out the detergent.
It is recommended to use
pure water only
, 0.6 A
7/8/2019 14:43