Dirt Devil Galileo M8000 Manual De Instrucciones página 33

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 92
2 Unpacking and assembling
4
5
4. Attach the floor nozzle on the lower end of the telescop-
ic tube (Fig. 4), until the you hear and feel the click lock
of the floor nozzle snap into place.
NOTE:
When fitting the two parts together, it may be necessary
to turn them slightly counter to each other, until the you
feel and hear the click lock snap into place.
5. By lightly pulling apart, check whether telescopic tube
and floor nozzle are securely connected.
NOTE:
If you want to disconnect the two elements, you must
press the release catch on the telescopic tube (Fig. 4/
magnifying glass) and then pull the handle out of the floor
nozzle.
6. Adjust the length of the telescopic tube. Push the re-
lease latch on the tube downward to do this (Fig. 5).
Then extend the telescopic tube to the desired length.
Let go of the release catch while pulling until it locks in
place. You will hear a distinct click.
Your cylinder vacuum cleaner is now ready for use.
33

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido