Symbols; Safety Warnings; General Safety Instructions For Power Tools - Festool ETS EC 150/3 EQ Manual De Instrucciones

Contents
1 Symbols..................................................... 13
2 Safety warnings.........................................13
3 Intended use..............................................14
4 Technical data........................................... 14
5 Parts of the machine.................................15
6 Operation................................................... 15
7 Settings......................................................15
8 Working with the machine........................ 16
9 Service and maintenance..........................17
10 Accessories............................................... 17
11 Environment.............................................. 17
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions.
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Connecting the mains power cable
Disconnecting the mains power cable
Do not dispose of it with domestic
waste.
Safety class II
Tip or advice
Handling instruction
2

Safety warnings

2.1 General safety instructions for power
tools
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" used in the safety in­
structions refers to mains-powered power tools
(with power cable) or battery-powered power
tools (without power cable).
Only for AS/NZS: The tool shall always be
-
supplied via residual current device with a
rated residual current of 30 mA or less.
2.2 Machine-related safety instructions
Harmful/toxic dusts can be produced dur­
-
ing your work (e.g. lead-containing paint,
some types of wood and metal). Aontact
with these dusts, especially inhaling them,
can represent a hazard for operating per­
sonnel or persons in the vicinity. Comply
with the safety regulations that apply in
your country. Connect the electric power
tool to a suitable extraction system.
To protect your health, wear a P2 protec­
tive mask.
Always wear protective goggles to protect
against sanding hazards.
Use a residual current protective device
-
when metal grinding, as well as when the
operation of the power tool in a wet envi­
ronment cannot be avoided. In the event of
an electric shock, the protective switch
protects you against life-threatening cur­
rent through the body.
Clean work equipment soaked in oils, for
-
example sanding pad or polishing felt,
with water and allow to dry. Work equip­
ment soaked in oil may combust spontane­
ously.
Attention: Risk of fire! Avoid overheating
-
the grinding material and the sander. Al­
ways empty the dust container before tak­
ing a break. Swarf in the dust bag, microfil­
ter, paper bag (or in the filter bag or filter
of the mobile dust extractor) may sponta­
neously combust in unfavourable condi­
English
13