Walgreens WGNBPA-240BT Manual Del Usuario E Instrucciones De Programación página 24

Using Single Measurement Mode:
1. Please make sure the Triple-Check switch, located on the side of the
unit, is in the OFF position.
2. Press the "
After the user number is selected, press the "START/STOP" button
to confirm the user.
3. With the cuff wrapped around your arm, press the "START/STOP"
button. Do not inflate the cuff unless it is wrapped around your arm.
All digits will light up to check the display functions. The checking
procedure will be completed after about 3 seconds.
NOTE: The Check-with-Confidence™ icon
this is the 1st or 30th use, and the feature is "ON". The monitor will then
perform a self-check to ensure it is working properly.
4. After all symbols disappear, the display will show "00". The monitor
is ready to measure and will automatically inflate the cuff to begin
measurement.
5. When the measurement is completed, the cuff will deflate entirely.
Systolic pressure, diastolic pressure, and pulse will be shown
simultaneously on the LCD screen. The measurement is then
automatically stored into memory.
Triple-Check
ON
" button to choose User 1 or User 2.
23
OFF
will stay on the screen if