Use As An Upright Vacuum Cleaner For Cleaning Floors - Dirt Devil DUSTY 360 DD1400 Manual De Instrucciones

3 Vacuum cleaning

3.3 Use as an upright vacuum cleaner for cleaning floors

5
6
CAUTION:
Use only intact nozzles. Only use the
®
DIRECT PATH floor nozzle with the
micro-fibre dusting pad for sensitive sur-
faces.
1. Fit the telescopic tube by inserting it into
the vacuum cleaner opening so that you
hear it click into place (fig. 5).
2. Set the length of the telescopic tube as
necessary by actuating the locking mech-
anism (fig. 1/11) and pulling on the tube at
the same time.
3. Fit a floor nozzle:
- Select the DIRECT PATH
with the micro-fibre dusting pad to gently
vacuum sensitive floors (fig. 5).
- Select the hard floor nozzle to vacuum
dirt from hard floors with crevices and
joints (fig. 6).
NOTE:
Both nozzles can only be fitted to the tele-
scopic tube.
NOTE:
Always maintain good posture when work-
ing. Select the telescopic tube length and
working height so that you can work in as
natural a position as possible.
4. Once you have fitted the components, you
can connect the appliance and switch it on
at the On/Off button (fig. 2/17, position "I").
5. Make sure that you switch off the appli-
ance before you remove or fit accessories.
NOTE:
Use the release catch (fig. 2/19) if you
want to release the attached nozzle or the
telescopic tube again.
®
floor nozzle
29