Reverse Installation Instructions - MS Turn Serie Manual De Instrucciones

4. Reverse installation instructions

4.1 Group 0 +I (0-18kg) children
seat belts
4.1.1 Please refer to section 3.1 for ISOFIX.
4.1.2 Make sure that the five-point harness is properly installed on the
child's safety seat. (Refer to section 8).
4.1.3 Refer to Section 3.2 for adjusting the five-point harness.
4.1.4 Refer to Section 3.4 to adjust the chair body (11) to the most tilted
position and to the locked state (not to slide and not to rotate).
4.1.5 Check that the seat is in the most tilted position, that is, the sticker
on the seat is aligned with the 5 stalls on the base, and then place the child
mounting seat in the opposite direction of the vehicle in the vehicle seat (Fi-
gure 4.1. 1).
Note: When the 0 + I group children use, be sure to adjust the stalls to 1
grade.
48
ISOFIX + top-tether + five-point
12
(Figure 4.1.1)