MS Turn Serie Manual De Instrucciones página 59

Go to the back of the safety seat
3. Press down on the back cover button (31) to open the seat back cover
(32). (Figure 7.3)
4. Remove the shoulder strap (42) from the seat (33) from the safety seat.
(Figure 7.4)
ADVERTENCIA: no sacar los cinturones , esconderlos dentro de la
silla de auto , ya que luego es muy difícil volver a colocarlos en caso
de que lo necesite.
5. Place the three tabs (33) in the groove (34) of the cover of the instruc-
tions and secure them. (Figure 7.5)6. Slide the shoulder ring (35) from the
ends of the shoulder belt. (Figure 7.6)
35
35
(Figure 7.6)
37
37
06
06
05
05
(Figure 7.7)
put the back of the new paste on both sides of the Velcro (39) the cloth cover
recovery. (Figure 7.9)
11. Turn the lower sheet (40) into the vertical, upwardly pull the sheet (40)
out of the hole (41), and remove the five-point safety button (19). (Figure 7.10).
7. Cover the back cover (32).
Go to the front of the safety seat
8. Pull the shoulder strap (05) and shoulder pad (06)
out of the front hole (37). (Figure 7.7)
9. Open the five-point safety button (19). (Figure 7.8)
10. Open the Velcro on both sides (39) to open the
cloth cover, put the buckle on both sides of the slot (38),
19
19
(Figure 7.8)
38
38
39
39
(Figure 7.9)
41
41
40
40
(Figure 7.10)
59 59