Monitor Settings - Extel IRON 2 Instrucciones De Uso

MP4-AUTO: automatic recording
MP4-MAN: manual recording
- To delete a video, select it, click on the
Note: Videos will be recorded by your micro SD card in a 15-second recording per sequence in automatic mode.
c. Camera function in manual mode
function available if a micro SD card (not included) is inserted in the monitor
You can record videos manually using the Camera menu. (only video, no audio)
- To launch manual recording, you must go into the Camera menu.
- Choose the camera that you wish to use for recording (outdoor station from the kit or as an option: additional
PL IRON 2 outdoor station) and confirm you choice with
- Press the
To view the recordings, see the previous paragraph (c. Video: 2. Viewing video recordings of your visitors).
d. Settings on the outdoor station(s)
- If you notice that the camera lens is not correctly aligned when installing the monitor and the outdoor station
in their final positions, you can compensate for this misalignment when wiring by moving the camera horizontally
and vertically and/or turning the direction of the camera.
Caution, you can only compensate by a few centimetres in height.
- 2 settings are accessible in the outdoor station:
- At the top left, volume setting for the outdoor station loudspeaker.
- At the top right, volume setting for the loudspeaker on the monitor.
To adjust the settings, use a small screwdriver, turning it gently to avoid excessive force on the stops.
e. Monitor settings
GENERAL:
• To access the videophone settings menu, press the
• After completing the configuration, press
•Video settings:
To access the video settings, select "Video" and press
ou can configure the video settings by pressing
confirm your settings by pressing
- "Brightness": Brightness
- "Contrast": Contrast
- "Color": Colour
GB7
key to start recording (5mn). Press
:
CFI EXTEL IRON 2 - V1 - 09/2013
key and confirm "delete" by pressing
.
to stop recording.
key (or the
to confirm and to return to the previous menu.
.
again, navigate in the menus using the
.
key for the additional monitor).
and keys,