Operation - Bartscher 1400T1S2 Manual Del Usario

5.2 Operation

CAUTION!
Carefully read this operation manual as it contains instructions for safety
and operation of the device.
Keep the manual for later use.
Improper installation, operation, maintenance and cleaning, as well as any
modifications may cause incorrect operation, damages, and injuries.
Before the first use
•
Before use clean the device and accessories according to section 6 „Cleaning
and maintenance".
•
Connect the device to the single grounded socket.
•
Turn the device on by pressing ON/OFF switch located on the control panel,
next to the temperature controller.
•
Green lamp will come on. The digital display shows current temperature in the device.
•
The device should reach the required temperature before filling with food products.
Digital temperature controller
Basic settings of the temperature are pre-set and reflect the operating temperature in
the range of 0 ° C – 10 ° C inside of the device. Dur ing normal operation of the device
the digital display indicates the current temperature inside of the device.
Button Functions
Display a required value, select parameters
in programming mode or save the procedure
Manual start of defrost
In programming mode, select a parameter
code, increase the displayed value
In programming mode, select a parameter
code, decrease the displayed value
AUX
- 33 -