Sears CRAFTSMAN Manual Del Operador página 24

ModeE # 107o280340
Overall Length 64"
Overall Width 32"
Deck Size (inches} 28"
Height of Cut (5-position} 1.5 - 4.0"
Transmission Type 5-Spd Disc Drive
Tire Pressure
Front 11 ×4°00-4 12 psi
Rear 16x6.5-8 12 psi
Turning Radius 28"
Engine Power (hp} 12.5
Engine Displacement (cc} 344 cc
Engine OH Capacity 42 - 44 oz.
Fue_ Tank Capacity 7 qts.
Spark PEug Gap .030"
Weight 314 Ibs.
Common Service Part
Cutter B_ade (28" Standard Air-Lift)
Cutting Deck Belt (28"}
Air FHter Cartridge
Air FHter Pre-CEeaner
Fue_ Stabilizer
Spark P_ug
Part Number
7019515
7022252
698413 or 5079
697292 or 5079
5041
491055
Engine Power Rating Information: The gross power rating for individual gas engine models is labeled
in accordance with SAE (Society of Automotive Engineers) code J 1940 (Small Engine Power & Torque
Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE
J 1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600
RPM. Actual gross engine power wifl be lower and is affected by, among other things, ambient operating
conditions and engine-to-engine variabilky. Given both the wide array of products on which engines are
placed and the variety of environmental issues applicable to operating the equipment, the gas engine
will not develop the rated gross power when used in a given piece of power equipment (actual "on-site"
or net power). This difference is due to a variety of factors including, but not limited to, accessories (air
cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating
conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and
capacity limitations, Bdggs & Stratton may substitute an engine of higher rated power for this Series engine.
24