Instructions For Use With Amt- And Mlt-Series Cable Ties; Instructions For Use With Mbt-Series Cable Ties; Maintenance; Repairs - HellermannTyton HDT16 Manual De Instrucciones

6 .5 Instructions for use with AMT- and MLT-Series cable ties

• The information on the tensile strength are only to be considered as reference values.
• Follow the assembly instructions to achieve the proper results.
• Consistent application and performance depends on the user and proper use of the product.
• For large cable bundles or hard, smooth surfaces, use an LFPC profile
support and protection.
• Ensure that the cable ties are not over-tensioned, otherwise the cables could be damaged.

6 .6 Instructions for use with MBT-Series cable ties

• Make sure that the cable tie is firmly closed in order to ensure reliable fastening.
• For large cable bundles or hard, smooth surfaces, use an LFPC profile
support and protection.
• Ensure that the cable ties are not over-tensioned, otherwise the cables could be damaged.

7 Maintenance

The application tool is largely maintenance-free.

8 Repairs

NOTE
The application tool can be damaged when opening the housing, making changes to the components or if
repairs are carried out incorrectly.
f Application tool only to be repaired by authorised personnel.
Repair work must only be carried out by the manufacturer or persons authorised by the
manufacturer. This also includes opening the application tool and changing components or
functions.

9 Taking out of operation

When used for its intended purpose, the application tool will perform continuously without issues.
Should the application tool need to be withdrawn from operation, it must be disposed of correctly
in accordance with the country-specific disposal guidelines.

10 Technical data

TYPE
HDT16 165 x 170 x 65 mm
Dimensions Maximum strap
(W x H x D) width
16 mm
Operating instructions • HDT16 • 02-2016 • 110-40000
Maintenance
(Figure ) for additional
1 B
(Figure ) for additional
1 B
Weight Article-No .
1.00 kg 110-40000
7